How to Make Sap Gloves? – 4-Step Guide for DIYers

Written by

John Cotton

FACT-CHECKED BY

Logan Miller

how to make sap gloves

Sap gloves are a hand-held weapon primarily used by martial artists for self-defense. Not only do these babies protect your knuckles, but they also pack a punch that would make Mike Tyson proud.

Knowing that it gives you an advantage in a fight, you might be tempted to rush towards a store to buy it. Now hold on, bucko.

While there’s nothing wrong with purchasing one, understand that manufactured leather sap gloves may not be the right fit for you. The materials could either be too light or too heavy. Instead of empowering you, it might just slow you down. Not cool.

That’s knowing how to make sap gloves on your own allows you to choose a specific weight that would feel good on your hands. It’s like having your own homemade brass knuckles.

If you want to know how to make a pair of gloves, read along.

What to Prepare

  • Cutting board or scrap leather
  • Leather gloves
  • Leather strips
  • Chalk or fabric marker
  • Scissors or rotary cutter
  • Measuring tape or ruler
  • Metal Powder (steel, iron, or lead powder)
  • Funnel or spoon
  • Heavy thread
  • Needle

Step-by-step to Make Sap Gloves

With the steps below, you’ll be able to create a pair of lead gloves. Self-defense implies that you ought to hurt entities who want to harm you. To build a pair of tactical sap gloves, follow these instructions.

Step 1: Measure

tactical-sap-gloves

The first thing you need to do is make a fist, and look at it.

Pay attention to how making a fist displays two rows (or columns depending on how you hold your fists) sets of joints. The upper joint should be the knuckle, while the other at the bottom is the middle joint.

Now, what you need to do is measure the distance between the middle joint and an inch above the knuckle. Do it for every finger —except for your thumbs.

Also, measure the width of each of your fingers —except for your thumbs.

Write down each measurement so you won’t forget them.

Step 2: Cut and attach the leather strip

making-a-glove

The appropriate material for the leather you’re going to use should have enough thickness to it so that you can protect your knuckles.

Once you have the leather strips, cut them into the measurement you took earlier. After that, you can now attach the leather strips to your gloves.

Step 3: Stitch

lead-gloves-self-defense

This method ensures more secure and durable padding.

To sew the leather strips onto the inside of the glove, you will need a sewing machine or a hand-sewing needle and thread.

It’s important to use a strong thread, such as polyester or nylon thread, that can withstand the wear and tear of punching every day.

When sewing the leather strips to the inside of the glove, keep in mind to keep the stitches close together and as straight as possible.

This will ensure a secure hold and will prevent the strips from shifting or bunching up inside the glove.

Step 4: Fill the gloves and sew them close

diy-gloves

Once the pocket is open, you can use the funnel or other tool to pour the metal powders into the pocket.

Once you have filled the pocket with the desired amount of metal powders, you can then close the pocket and the lead sap gloves for self-defense are ready to use.

The recommended amount is 2oz per pocket. If you finish filling all four, you should have a pair of 8 oz sap gloves on your hands. Add or subtract depending on your preference.

Once finished, you can close the remaining opening by sewing it tightly. Now you can have yourself, practically speaking, sap gloves with steel shot knuckles.

Helpful Tips

sap-gloves-with-steel-shot-knuckles

You can actually craft your own fingerless sap gloves.

These bad boys cover your knuckles while leaving your fingers exposed. This is perfect if you want to show your dirty nails, or give your opponent the middle finger.

Aside from those practical reasons, you’ll have the added benefit of being able to use your fingers for better gripping and grappling in a fight, while still maintaining the protection of your knuckles.

Interested? All you have to do to make this is to grab a strong scissor or a rotary cutter and cut the gloves from the middle joint.

To smooth the edge of the cut, use a leather burnisher if you have one. But if you don’t, grit sandpaper is a good alternative.

Conclusion

In conclusion, making a glove is a fun and rewarding DIY project that can save you money and give you a sense of satisfaction.

Remember: be safe when working with the materials and tools, and always keep in mind the laws in your area regarding the use of DIY gloves.

With a bit of creativity and patience, you can have your own unique and personalized sap gloves that will stand out from the rest. If you find this guide on how to make sap gloves helpful, feel free to share it.

5/5 - (2 votes)